Frequently Asked Questions
POWER UNIT ELECTRICAL SPECIFICATIONS
|240 Volt AC||50||0.55||1||4-6|
IMPORTANT NOTE: EXTENSION CORDS ARE NOT RECOMMENDED. Using extensions cords can adversely affect operation and can cause overheating conditions and damage to power unit. If using an extension cord, use the shortest cord possible. Refer to extension cord size chart below.
|25 feet||14 gauge|
|50 feet||14 gauge|
|75 feet||12 gauge|
- Our new and improved SLX models feature cantilevered rubber block trays for increased rubber block reach. Not only do the extended trays allow for better functionality, they also allow the contact blocks on the trailing side of the lifting frames to be positioned closer to the wheels during set-up.
- We have added a 7,000-pound capacity model to our lineup. The new BL-7000SLX is the perfect solution for servicing full size vehicles and light trucks.
- Our BL-5000SLX and BL-7000SLX models now feature reinforced upper frame rails with box-welded steel reinforcements to minimize deflection.
- The enhanced SLX models also feature dual-position automatic safety locks that engage automatically as the lift rises. A quick flip of the lock bar disengages the safeties for a smooth hands-free descent.
The QuickJack can be safely used in the temperature range of 40°F (5°C) to 120°F (50°C).
Any general purpose ISO-32, ISO-46, or ISO-68 hydraulic oil.
Approved ATF fluids are Dexron III, Dexron VI, Mercon V, Mercon LV or any Synthetic Multi-Vehicle ATF.
Compare Full Specifications
|Lifting Capacity||3,500 lbs.||5,000 lbs.||5,000 lbs.||7,000 lbs.||7,000 lbs.||6,000 lbs.|
|A - Collapsed||3" / 76 mm||3" / 76 mm||3" / 76 mm||3.6" / 91 mm||3.6" / 91 mm||3.6" / 91 mm|
|B - Collapsed w/ Small Block||3.5" / 89 mm||3.8" / 97 mm||3.8" / 97 mm||4" / 102 mm||4" / 102 mm||4" / 102 mm|
|C - Raised (Frame Only)||16.5" / 419 mm||17.6" / 447 mm||17.6" / 447 mm||18.2 / 462 mm||18.2 / 462 mm||18.2 / 462 mm|
|D - Raised (Small Block)||17" / 432 mm||18.4" / 467 mm||18.4" / 467 mm||18.6" / 471 mm||18.6" / 471 mm||18.6" / 471 mm|
|E - Raised (Large Block)||18.5" / 470 mm||19.2" / 487 mm||19.2" / 487 mm||19.4" / 493 mm||19.4" / 493 mm||19.4" / 493 mm|
|F - Raised (Stacked Blocks)||20" / 508 mm||21.3" / 542 mm||21.3" / 542 mm||21.6" / 548 mm||21.6" / 548 mm||21.6" / 548 mm|
|G - SUV Adapters||Not Compatible||20.3" / 516 mm||20.3" / 516 mm||20.7" / 526 mm||20.7" / 526 mm||20.7" / 526 mm|
|H - SUV Adapters (w/ Pin)||Not Compatible||23.3" / 592 mm||23.3" / 592 mm||23.7" / 602 mm||23.7" / 602 mm||23.7" / 602 mm|
|I - Lifting Point Spread - Max||50.5" / 1,283 mm||60" / 1,524 mm||66" / 1,676 mm||60" / 1,524 mm||66" / 1,676 mm||75.8” / 1,926 mm|
|J - Lifting Point Spread - Min||26.7" / 678 mm||29.5" / 749 mm||37.4" / 951 mm||29.5" / 749 mm||37.4" / 951 mm||47.4” / 1,205 mm|
|K - Frame Width||10.6" / 268 mm||11" / 278 mm||11" / 278 mm||12.5" / 318 mm||12.5" / 318 mm||12.5" / 318 mm|
|L - Frame Length||62" / 1,575 mm||70" / 1,778 mm||75" / 1,905 mm||71" / 1,803 mm||76" / 1,930 mm||86” / 2,185 mm|
|Frame Weight||60 lbs. / 27 kg||76 lbs. / 35 kg||80 lbs. / 36 kg||96 lbs. / 44 kg||101 lbs. / 46 kg||110 lbs. / 50 kg|
|Power Unit Weight||35 lbs. / 16 kg||35 lbs. / 16 kg||35 lbs. / 16 kg||35 lbs. / 16 kg||35 lbs. / 16 kg||35 lbs. / 16 kg|
|Shipping Weight||180 lbs. / 82 kg||212 lbs. / 96 kg||220 lbs. / 100 kg||242 lbs. / 110 kg||262 lbs. / 119 kg||282 lbs. / 128 kg|
|BUY NOW||BUY NOW||BUY NOW||BUY NOW||BUY NOW||PRE-ORDER|
Specifications are subject to change without notice.
Adapters & Rubber Block Specifications
Small Rubber Blocks (Included)
Large Rubber Blocks (Included)
Pinch-Weld Blocks (Optional)
SUV & Light Truck Adapter (Optional)
Motorcycle Lift Adapter (Optional)
Make sure there is enough clearance at the front and rear of the car.
Yes, you can drive "over" the QuickJack frames (a recommended method), but do NOT drive on top of the frames.
The small air cylinders welded to the sides of the main hydraulic cylinders act like air springs. Because the static weight of the lifting frames is minimal, the air cylinders assist lowering the frames after the vehicle's tires touch the floor, or if the lift was ever raised with no load.
An alternative method, but not quite as appealing would be to attach large springs to the jack frames similar to those used on BendPak’s P-6 low-rise lift as shown here; tolerable on the P-6, but probably not the best option for the lightweight QuickJack.
Inflate each air bottle cylinder to 50-PSI. Be sure to pull the connector off quickly to minimize air loss and don’t forget to replace the dust caps as they help to retain air. The cylinders will require periodic recharging.
Standard DC unit time to full rise: 18 seconds
Although we have sold thousands of QuickJack’s, with many being used on asphalt, we have yet to hear of one unit sinking or making deep impressions in the asphalt. (We guess asphalt hardness and weather temp would play a role, however).
If you add up the total surface area of the QuickJack bottom frames (the contact patch), it will typically add up to more than the surface area of four tires. In other words, if your car is not sinking in the asphalt, in all likelihood, your QuickJack shouldn’t either.
Be sure to check out our photo gallery. You’ll see the QuickJack being used on many different floor surfaces.
Now if you’re the extra cautious OCD type, heck yea, shoring your QuickJack with plywood underneath sure wouldn’t hurt and you’d even gain a little extra lifting height to boot – a win, win!
Sales tax will not be added to orders destined for shipment outside of California. Applicable state sales tax will be added to California orders - even if ordered through an out-of-state dealer. QuickJack is not responsible for individual states' sales tax reporting laws pertaining to online or catalog purchases so we encourage you to check your state's regulations before you shop. If you are a tax-exempt customer, you will be required to send us a signed copy of your tax exemption certificate.
All QuickJack shipments are subject to our standard return policies and associated restocking charges. The customer must retain original cartons and contact our Customer Service Department within 10 days from the date of the invoice before any product is returned to the manufacturer. Special or custom order products of any kind cannot be returned for credit or refund.
It is the customer’s responsibility to check cartons for signs of damage, shortage, or abuse. The customer should open the cartons and check the contents and note any shortages or damages to the freight bill at the time of delivery. It is the customer’s right to refuse any shipment that shows obvious signs of damage or shortage at the time of delivery. If damage is discovered after the delivery driver has left, retain damaged packaging materials and contact our customer service department at 1-888-262-3880 or email us at firstname.lastname@example.org
Most orders are provided with FREE SHIPPING and are shipped prepaid to direct shipping points in the continental United States (48-states). An additional fee may apply to residential or rural deliveries. An additional service fee may apply for special handling requests. For orders outside the continental US, please contact our international customer service department for special rates. Shipping and handling rates are subject to change without notice. Read about our Free Shipping policy.
"Accessory only" or "service parts orders" shipments are generally not eligible for free freight. Orders for accessories or service parts are subject to a per piece freight charge based on package weight and destination zone.
We will designate shipping carriers based on region and/or best service defined by our shipping department. In the event a preferred carrier is requested, you may be responsible for paying any additional freight charges at the time of order.
> Truck Freight - 2 working days after ship date.
You would need a delivery appointment if you require that the freight carrier contact you at least 24 hours in advance to schedule a time to deliver your freight shipment. An appointment charge will be assessed for this service. Read about our Delivery and Shipping Details.
Product information and specifications are available on this website. Additional information is also available by contacting our customer service department at:
1-888-262-3880 or email us at email@example.com.
Our commitment to you does not end once you have received your order. Our dedicated team of professionals can assist you in placing your order, tracking your shipment, assist in delivery and installation, fulfilling warranty requirements, and much more. If you run into problems, we have the solutions to ensure your satisfaction. Just call us at:
1-888-262-3880 or email us at firstname.lastname@example.org.
QuickJack is committed to your privacy. We don't share any customer information with third parties. All information gathered by QuickJack about its users is used solely to create a better shopping experience for our customers. For full details visit click here.